To prevent your ink cartridges from drying, the system will automatically print a page for scheduled times of your choice. This will prevent underused cartridges from drying out.
How to set your device!
Device Usage Steps:
Download the mobile application via the QR code.
Connect the device to the USB port for power.
When the device turns on, the LED will start blinking.
Open the Inksaver application.
Select and connect to the device from the application.
Configure the Wi-Fi and settings, then save them.
Wait for the printout approximately 5 minutes.
Our Products
Epson Printers
$29.99 + Tax & Shipping
HP Printers
$29.99 + Tax & Shipping
Canon Printers
Out of stock!
Frequently Asked Questions (FAQ)
Plug the device into a USB power source.
Wait for the LED to start blinking.
Open the InkSaver mobile app and connect to the device via Bluetooth.
Enter your Wi-Fi details and print scheduling preferences, then save the settings.
The device will start working as scheduled.
Make sure the printer's IP address and port are correctly configured in the app.
Check that the printer is turned on and connected to the same network as the device.
Use the "Print Test Page" option in the mobile app to verify the connection.
Restart both the device and the printer if the issue continues.
Unplug the device from the power source.
Press with needle and hold the button while plugging it back in.
Wait for the LED to start blinking, then release the button.
Use the mobile app to reconfigure the device.
Open the InkSaver mobile app.
Connect to the device via Bluetooth.
Go to the settings menu, update the print frequency, and save the changes.
The new settings will take effect immediately.
If you change your printer or Wi-Fi network, you need to update the device settings.
Unplug the device, press and hold the button, and reconnect it to power.
Open the mobile app, reconnect to the device, and update the printer or Wi-Fi information.
The device will automatically reconnect to Wi-Fi once power is restored.
All previous settings will be saved, and the device will resume its normal operation.
A blinking LED means the device is in Bluetooth mode and waiting for configuration.
Open the mobile app to connect and set up the device. Will be 15 seconds time frame for this connection.
If the issue persists, reset the device by unplugging and reconnecting it with the button held down.
Reset the device by unplugging it and holding down the button while plugging it back in.
Open the InkSaver app and reconnect to the device.
Enter the new Wi-Fi credentials and save the changes.
No, the device requires a stable Wi-Fi connection to communicate with the printer and synchronize its tasks.
Ensure the Wi-Fi network is reliable and within range of the device.
The device is designed to work with a single printer at a time.
If you want to switch printers, update the printer IP, port, and path settings in the mobile app.
